PLANET XGS3-24042 - Manual (Page 1180)

75-10
Incoming DSCP Differentiated Services CodePoint.
Tunnel ID The Tunnel ID
Protected LSP id The id of protected LSP
QoS Resource id The ID of Qos Resource
in label The in label
In-Interface The in interface
Out-Label The out label
Out-Interface The out interface
Admin Status The administration status
Oper Status The operation status
Oper Code The operation code
75.9 show mpls ilm-table
Command:
show mpls ilm-table
Function:
Display the information of ILM routers created by MPLS on the switch.
Command Mode:
Admin and Config mode.
Usage Guide:
Implementing this command will display the information of ILM routers created by MPLS.
Example:
Switch#show mpls ilm-table
In-Label Out-Label In-Intf Out-Intf Nexthop FEC
640 3 Vlan1 Vlan2 24.1.1.2 2.2.2.2/32
641 3 Vlan2 Vlan1 14.1.1.1 1.1.1.1/32
Display Explanation
In-Label The in label
Out-Label The out label
In-Intf The in interface
Out-Intf The our interface
Nexthop The next-hop address
FEC The fec address