PLANET XGS3-24042 - Manual (Page 774)

44-49
To enable all the debugging information about MSDP; the no command disable all the debugging
information.
Command Mode:
Admin Configuration Mode.
Default:
Disabled.
Usage Guide:
Enable the debugging switch of MSDP, display the protocol packet send/receive information of
MSDP Peer---packet, keepalive packet send/receive information---keepalive, event
information---event, NSM mutual information---nsm, timer information---timer, protocol state
information---fsm, filter policy information---filter.
Exampe:
Switch#debug msdp all
44.4.9 debug msdp events
Command:
debug msdp events
no debug msdp events
Function:
Enable /disable the switch of msdp events debug.
Default:
Close the switch.
Command Mode:
Admin Mode.
Usage Guide:
The event of running MSDP protocol can be monitored after enable this switch.
Example:
Switch#debug msdp events
44.4.10 debug msdp filter
Command:
debug msdp filter
no debug msdp filter