PLANET XGS3-24042 - Manual (Page 432)

28-71
28.14 show ip dhcp relay information option
Command:
show ip dhcp relay information option
Function:
This command will display the state information of the DHCP option 82 in the system, including
option82 enabling switch, the interface retransmitting policy, the circuit ID mode and the switch
DHCP server option82 enabling switch.
Command Mode:
Admin and Global Configuration Mode.
User Guide:
Use this command to check the state information of Relay Agent option82 during operation.
Example:
Switch#show ip dhcp relay information option
ip dhcp server relay information option(i.e. option 82) is disabled
ip dhcp relay information option(i.e. option 82) is enabled
Vlan2:
ip dhcp relay information policy keep
ip dhcp relay information option subscriber-id standard
Vlan3:
ip dhcp relay information policy replace
ip dhcp relay information option subscriber-id foobar