PLANET XGS3-24042 - Manual (Page 1064)

59-3
Function:
Enable/ disable the event debugging of web portal authentication.
Command Mode:
Admin Mode.
Default:
There is no limitation.
Usage Guide:
Enable the event debugging of web portal authentication, the no command disables the event
debugging.
Example:
Enable the event debugging of web portal authentication.
switch#debug webportal event
<NULL> 0 event event debug is on
59.5 debug webportal packet
Command:
debug webportal packet {all | receive | send} {interface <ethernet IFNAME | IFNAME> |}
no debug webportal packet {all | receive | send} {interface <interface-name> |}
Function:
Enable/ disable the debugging that show the synchronization information of the local clock.
Parameter:
send: Enable the debugging that web portal sends the packet.
receive: Enable the debugging that web portal receives the packet.
all: Enable the debugging that web portal receives and sends the packet.
<ethernet IFNAME | IFNAME>: The port name.
The port name is null that means to enable all ports.
Command Mode:
Admin Mode.
Default:
There is no limitation.
Usage Guide:
Enable the packet debugging of web portal authentication, the no command disables the packet
debugging.
Example:
Enable the packet debugging of web portal authentication.