PLANET XGS3-24042 - Manual (Page 1043)

57-4
Port mode
Default:
This configuration is null.
Usage Guide:
This command configures circuit-id alone for each port, the priority is higher than pppoe
intermediate-agent identifier-string command.
Example:
Configure circuit-id as abcd/efgh on port ethernet1/0/3 of vlan3.
Switch(config-if-ethernet1/0/3)#pppoe intermediate-agent circuit-id abcd/efgh
After port ethernet1/0/3 of vlan3 receives PPPoE packet, circuit-id value of the added vendor tag
as ”abcd/efgh”.
57.6 pppoe intermediate-agent identifier-string option
delimiter
Command:
pppoe intermediate-agent identifier-string <string> option {sp | sv | pv | spv} delimiter
<WORD> [delimiter <WORD>]
no pppoe intermediate-agent identifier-string option delimiter
Function:
Configure circuit-id of the added vendor tag, the no command deletes this configuration.
Parameter:
<string>: identifier-string, the max character number is 47 bytes.
{sp | sv | pv | spv}: This option can select the combination format for slot, port, vlan, sp means slot
and port, sv means slot and vlan, pv means port and vlan, spv means slot, port and vlan.
<WORD>: The delimiter between slot, port and vlan, the range is (# | . | , | ; | : | / | space). Note:
There are two delimiter WORD in spv combo mode, the first delimiter between slot and port, the
second delimiter between port and vlan.
Command Mode:
Global mode
Default:
This configuration is null.
Usage Guide:
This command is used to configure global circuit id, the priority is higher than pppoe
intermediate-agent access-node-id command. circuit-id value is access-node-id +” eth “+ Slot ID +
delimiter + Port Index + delimiter + Vlan ID, access-node-id occupies n bytes (n<48), “ eth “ is space