PLANET XGS3-24042 - Manual (Page 193)

11-39
Link Fault=0 Dying Gasp=0 Critical Events=0
------------------------------------------------------------------------
Packet statistic：
Packets Send Receive
OAMPDU 553 21
Information 552 21
Event Notification 1 0
Loopback Control 0 0
------------------------------------------------------------------------
Field Description
oam_status
Status of Ethernet OAM:
enable, OAM is enabled;
disable, OAM is not enabled.
local _mode
Working mode of Ethernet OAM:
active, the port is set as active mode;
passive, the port is set as passive mode.
Period Transmission period of packets
Timeout Timeout of connection
local_pdu
The way in which the local end processes Ethernet OAMPDUs:
RX_INFO, the port only receives Information OAMPDUs and does not
send any Ethernet OAMPDUs.
LF_INFO, the port only sends Information OAMPDU packets without
Information TLV and with their link error flag bits being set.
INFO, the port only sends and receives Information OAMPDU packets.
ANY, the port sends and receives any OAMPDU packets.
local_mux_action
Working mode of the local transmitter:
FWD, the port can send any packets;
DISCARD, the port only sends OAMPDU packets and discards others.
local_par_action
Working mode of the local receiver in the following:
FWD, receiving any packets is allowed;
DISCARD, only OAMPDU packets is received while others are
discarded;
LB, OAM remote loopback is enabled on the port. In this case, all the
packets except OAMPDU packets received are returned to their
sources along the ways they come.
Loopback Supported Whether support remote loopback: YES for support and NO for not.
Unidirectional Support Whether support unidirectional transmission: YES for support and NO