PLANET XGS3-24042 - Manual (Page 1128)

69-2
Admin Mode.
Example:
To enable the debug switch of displaying local time adjust information.
Switch# debug ntp adjust
69.3 debug ntp authentication
Command:
debug ntp authentication
no debug ntp authentication
Function:
To display NTP authentication information, the no form command disabled the switch of displaying
NTP authentication information.
Default:
Disabled.
Command Mode:
Admin Mode.
Usage Guide:
To display NTP authentication information, if the switch is enabled, and if the packets schlepped
authentication information when the packet in sending or receiving process, then the key identifier
will be printed out.
Example:
To enable the switch of displaying NTP authentication information.
Switch# debug ntp authentication
69.4 debug ntp events
Command:
debug ntp events
no debug ntp events
Function:
To enable/disable debug switch of displaying NTP event.
Default:
Disable the debug switch of displaying NTP event.
Command Mode: