PLANET XGS3-24042 - Manual (Page 856)

45-1
Chapter 45 IPv6 Multicast Protocol
45.1 Public Commands for Multicast
45.1.1 show ipv6 mroute
Command:
show ipv6 mroute [<GroupAddr> [<SourceAddr>]]
Function:
show IPv6 software multicast route table.
Parameter:
GroupAddr: show the multicast entries relative to this Group address.
SourceAddr: show the multicast route entries relative to this source address.
Command Mode:
Admin mode and global mode
Example:
show all entries of IPv6 multicast route table
Switch(config)# show ipv6 mroute
Name: Loopback, Index: 2002, State:49
Name: Vlan1, Index: 2006, State:1043
Name: Vlan11, Index: 2007, State:1043
Name: Vlan12, Index: 2008, State:1043
Name: Tunnel1, Index: 2009, State:d1
Name: Tunnel2, Index: 0, State:0
Name: pim6reg, Index: 2010, State:c1
Name: pimreg, Index: 2011, State:c1
The total matched ip6mr active mfc entries is 1, unresolved ip6mr entries is 1
Group Origin Iif Wrong Oif:TTL
ff2f::1 2014:1:2:3::2 Tunnel1 0 2008:1
ff3f::1 2012:1:2:3::2 NULL 4 0:0
Displayed information Explanation
Name the name of interface
Index the index number of interface
State the state of interface
The total matched ipmr active mfc entries The total matched active IP multicast route mfc