PLANET XGS3-24042 - Manual (Page 794)

44-69
44.5 Commands for ANYCAST RP v4
44.5.1 debug pim anycast-rp
Command:
debug pim anycast-rp
no debug pim anycast-rp
Function:
Enable the debug switch of ANYCAST RP function; the no operation of this command will disable
this debug switch.
Command Mode:
Admin Mode.
Default:
The debug switch of ANYCAST RP is disabled by default.
Usage Guide:
This command is used to enable the debug switch of ANYCAST RP of the router, it can display the
information of handling PIM register packet of the switch——packet, and the information of
events——event.
Example:
Switch#debug pim anycast-rp
44.5.2 ip pim anycast-rp
Command:
ip pim anycast-rp
no ip pim anycast-rp
Function:
Enable the ANYCAST RP of the switch; the no operation of this command is to disable the
ANYCAST RP function.
Command Mode:
Global Configuration Mode.
Default:
The switch will not enable the ANYCAST RP by default.
Usage Guide:
This command will globally enable ANYCAST RP protocol, but in order to make ANYCAST RP work,
it is necessary to configure self-rp-address and other-rp-address set.
Example: