PLANET XGS3-24042 - Manual (Page 800)

44-75
other rp unicast rp address: 192.168.2.1
--------------------------------
Display Explanation
anycast-rp: Whether the ANYCAST RP switch is globally enabled.
self-rp-address: The configured self-rp-address.
anycast-rp address: The configured anycast-rp-address.
other rp unicast rp address:
The configured other RP communication addresses in
accordance with the above anycast-rp-address.
other rp unicast rp address:
The configured other RP communication addresses in
accordance with the above anycast-rp-address.
anycast-rp address: The configured anycast-rp-address*.
other rp unicast rp address:
The configured other RP communication addresses in
accordance with the above anycast-rp-address.
44.6 Commands for PIM-SSM
44.6.1 ip multicast ssm
Command:
ip multicast ssm {default|range <access-list-number >}
no ip multicast ssm
Function:
Configure the range of pim ssm multicast address. The “no ip multicast ssm” command deletes
configured pim ssm multicast group.
Parameter:
default: indicates the default range of pim ssm multicast group is 232/8.
<access-list-number > is the applying access-list number; it ranges from 1 to 99.
Default:
Do not configure the range of pim ssm group address.
Command Mode:
Global Mode.
Usage Guide:
1. Only this command is configured, pim ssm can be available.
2. Before configuring this command, make sure ip pim multicasting succeed. This command can’t