PLANET XGS3-24042 - Manual (Page 405)

27-44
Command Mode:
Admin Mode.
Example:
Switch# debug ipv6 dhcp relay packet
27.7 debug ipv6 dhcp server
Command:
debug ipv6 dhcp server { event | packet }
no debug ipv6 dhcp server { event | packet }
Function:
To enable the debugging information of DHCPv6 server, the no form of this command will disable
the debugging.
Parameter:
event is to enable debugging messages for DHCPv6 server events, such as address allocation;
packet is for debugging messages of protocol packets of DHCPv6 server.
Default:
Disabled.
Command Mode:
Admin Mode.
Example:
Switch#debug ipv6 dhcp server packet
27.8 dns-server
Command:
dns-server <ipv6-address>
no dns-server <ipv6-address>
Function:
To configure the IPv6 address of the DNS server for DHCPv6 client; the no form of this command
will remove the DNS configuration.
Parameter:
<ipv6-address> is the IPv6 address of DNS Server.
Default:
No configured address pool of DNS Server by default.