Chapter 57 commands for pppoe intermediate agent, 2 pppoe intermediate-agent, Debug pppoe intermediate agent packet – PLANET XGS3-24042 User Manual
Page 1040: Receive, Send, Interface ethernet, Interface, Name, Pppoe intermediate, Agent
57-1
Chapter 57 Commands for PPPoE
Intermediate Agent
57.1 debug pppoe intermediate agent packet {receive |
send} interface ethernet <interface-name>
Command:
debug pppoe intermediate agent packet (receive | send|) interface ethernet <interface-name>
no debug pppoe intermediate agent packet (receive | send|) interface ethernet
<interface-name>
Function:
Enable PPPoE packet debug for the specified port, the no command disables it.
Parameter:
receive: Enable the debug that receive PPPoE packet.
send: Enable the debug that send PPPoE packet.
ehernet: Physical port
interface-name: Port name
Command Mode:
Admin mode
Default:
Disable PPPoE packet debug for the specified port.
Usage Guide:
Enable PPPoE packet debug for the specified port to show PPPoE packet received and sent by this
port.
Example:
Enable PPPoE intermediate debug for port ethernet1/0/2.
Switch#debug pppoe intermediate agent packet send interface ethernet 1/0/2
57.2 pppoe intermediate-agent
Command:
pppoe intermediate-agent
no pppoe intermediate-agent
Function: