78 neighbor unsuppress-map, Neighbor unsuppress – PLANET XGS3-24042 User Manual
Page 672
37-311
<0-65535>: Retry interval
Default:
120s.
Command Mode:
BGP route mode and address-family mode
Usage Guide:
Configure the connecting time interval when connecting a peer. The NO form restores the default
value.
Example:
Switch(config-router)#neighbor 10.1.1.64 timers connect 100
Related Command:
neighbor timers
37.78 neighbor unsuppress-map
Command:
neighbor {<ip-address>|<TAG>} unsuppress-map <WORD>
no neighbor {<ip-address>|<TAG>} unsuppress-map <WORD>
Function:
Configure or cancel the unsurprising to conditions meet the specified route map. The “no neighbor
{<ip-address>|<TAG>} unsuppress-map <WORD>” command cancels this configuration.
Parameter:
<ip-address>: Neighbor IP address.
<TAG>: Name of peer group.
<WORD>: Name of route-map.
Default:
Not set.
Command Mode:
BGP route mode
Usage Guide:
This command is generally for route suppressed by the aggregated and summary-only conditions.
Routes meet the route map conditions will still be send separately other than suppressed.
Example:
Switch(config-router)#neighbor 10.1.1.66 unsuppress-map rmp
Switch(config)#access-list 10 permit 10.1.1.100 0.0.0.255
Switch(config)#route-map rmp permit 5