PLANET XGS3-24042 - Manual (Page 731)

44-6
Chapter 44 IPv4 Multicast Protocol
44.1 Public Commands for Multicast
44.1.1 show ip mroute
Command:
show ip mroute [<GroupAddr> [<SourceAddr>]]
Function:
show IPv4 software multicast route table.
Parameter:
GroupAddr: show the multicast entries relative to this Group address.
SourceAddr: show the multicast route entries relative to this source address.
Command Mode:
Admin mode and global mode
Example:
show all entries of multicast route table.
Switch(config)#show ip mroute
Name: Loopback, Index: 2002, State:49
Name: null0, Index: 2003, State:49
Name: sit0, Index: 2004, State:80
Name: Vlan1, Index: 2005, State:1043
Name: Vlan2, Index: 2006, State:1002
Name: pimreg, Index: 2007, State:c1
The total matched ipmr active mfc entries is 1, unresolved ipmr entries is 0
Group Origin Iif Wrong Oif:TTL
225.1.1.1 192.168.1.136 vlan1 0 2006:1
Displayed information Explanation
Name the name of interface
Index the index number of interface
State the state of interface
The total matched ipmr active mfc entries The total matched active IP multicast route mfc
（multicast forwarding cache） entries
unresolved ipmr entries unresolved ip multicast route entries
Group the destination address of the entries
Origin the source address of the entries