PLANET XGS3-24042 - Manual (Page 588)

35-227
35.59 show ip ospf redistribute
Command:
show ip ospf [<process-id>] redistribute
Function:
To display the routing message redistributed from external process of OSPF.
Parameter:
<process-id> is the process ID ranging between 0~65535.
Command Mode:
Admin Mode and Configuration Mode.
Example:
Switch#show ip ospf redistribute
ospf process 1 redistribute information：
ospf process 2
ospf process 3
bgp
ospf process 2 redistribute information：
ospf process 1
bgp
ospf process 3 redistribute information：
ospf process 1
bgp
Switch#show ip ospf 2 redistribute
ospf process 2 redistribute information：
ospf process 1
bgp
35.60 show ip ospf route
Command:
show ip ospf [<process-id>] route
Function:
Display the OSPF routing table messages.