Sequence header duplication error, Specify title set directory, Spruceup can't run – Ulead 1.0 User Manual
Page 189: Spruceup warning 999, Spruceup will run in trial version, Srb status - aspi for windows failed init, Srb status - buffer alignment problem, Srb status - buffer size too big to handle, Srb status - device access security violation, Srb status - invalid aspi command
SpruceUp User’s Guide
14—11
R
Real Time Preview failed due to insufficient video memory. Please lower
your screen resolution or color depth and try again.
Indicates that the preview function of Simulation and Clip Properties is not working
properly. Typically caused by improper settings. See the Minimum System Requirements
topic for display card specifics.
Reduce size of menus. Menus not to exceed 1GB in total size.
Indicates that the project contains too many menus to compile. The DVD specification
requires all menus to fit within a 1GB file within the Video_ts folder. Each menu averages
150KB to 250KB, depending on content.
Repeat Field should not be turned on in Field Pictures.
Fatal import error. Signifies that repeat field is enabled in the field mode. Indicates the file
cannot be imported, and must be re-created compliant with the DVD specification.
S
Sequence Header Duplication Error
Fatal import error. Signifies a parameter not supported within the DVD specification.
Indicates the file cannot be imported, and must be re-created compliant with the DVD
specification.
Specify Title Set Directory
Indicates you need to specify the Output Destination to export the title set to.
SpruceUp can't run!
An unknown error is keeping SpruceUp from running. Re-install it if necessary.
SpruceUp WARNING 999!
You win the Easter Egg prize if you see this error!
SpruceUp will run in Trial version!
SpruceUp will run in the trial version as opposed to the full version. See the Registering
SpruceUp topic for details on enabling the full version.
SRB Status - ASPI for windows failed init!
SCSI Reset Bus error. Verify up-to-date drivers are in use. Also check SCSI terminations
and cabling. See the SCSI Issues topic for more information.
SRB Status - Buffer alignment problem!
SCSI Reset Bus error. Verify up-to-date drivers are in use. Also check SCSI terminations
and cabling. See the SCSI Issues topic for more information.
SRB Status - Buffer size too big to handle!
SCSI Reset Bus error. Verify up-to-date drivers are in use. Also check SCSI terminations
and cabling. See the SCSI Issues topic for more information.
SRB Status - Device access security violation!
SCSI Reset Bus error. Verify up-to-date drivers are in use. Also check SCSI terminations
and cabling. See the SCSI Issues topic for more information.
SRB Status - Invalid ASPI command!
SCSI Reset Bus error. Verify up-to-date drivers are in use. Also check SCSI terminations
and cabling. See the SCSI Issues topic for more information.