Ulead 1.0 - Manual (Page 190)

14—12 SpruceUp User’s Guide
SRB Status - Invalid host adapter number!
SCSI Reset Bus error. Verify up-to-date drivers are in use. Also check SCSI terminations
and cabling. See the SCSI Issues topic for more information.
SRB Status - Invalid parameter set in SRB!
SCSI Reset Bus error. Verify up-to-date drivers are in use. Also check SCSI terminations
and cabling. See the SCSI Issues topic for more information.
SRB Status - SRB aborted!
SCSI Reset Bus error. Verify up-to-date drivers are in use. Also check SCSI terminations
and cabling. See the SCSI Issues topic for more information.
Supplied pathname NOT valid!
Indicates the pathname is not available. This could be the Output Destination or the
Working Directory. Verify the path.
T
Temporal References in a GOP are out of sequence.
Fatal import error. Signifies a parameter not supported within the DVD specification.
Indicates the file cannot be imported, and must be re-created compliant with the DVD
specification.
The calculated AUDIO bitrate is too high for a legal DVD stream.
Fatal import error. Signifies the audio bit-rate exceeds the DVD specification limits.
Indicates the file cannot be imported, and must be re-created compliant with the DVD
specification. See the MPEG Settings Summary topic for details.
The calculated VIDEO bitrate is too high for a legal DVD stream.
Fatal import error. Signifies the video bit-rate exceeds the DVD specification limits.
Indicates the file cannot be imported, and must be re-created compliant with the DVD
specification. See the MPEG Settings Summary topic for details.
The CD-R SCSI device is not operating properly!
Confirm the CD-R/RW drive is plugged in, turned on, and the appropriate lights are lit. Shut
the computer down and completely power cycle everything. Ensure the drive is not
overheating. Ensure the latest drivers are installed.
The Disc Image is too big to fit on a DVD-R!
A disc image contains all of the files that make up a single layer of a 4.7GB DVD disc. This
error indicates the disc image is larger than 4.7GB, and will not fit on a layer of a DVD disc.
(Each disc layer and side requires its own disc image file.)
The Disc Image selected is too big to fit on the DVD-R blank disc.
Continuing will result in an incomplete recording of the Disc Image.
A disc image contains all of the files that make up a single layer of a 4.7GB DVD disc. This
error indicates the disc image is larger than 4.7GB, and will not fit on a layer of a DVD disc.
(Each disc layer and side requires its own disc image file.)
The DLT SCSI device is not operating properly! Manual intervention is
needed.
Verify connections and status of the drive. Shut the computer down and completely power
cycle everything. Ensure the drive is not overheating.