Unsupported media : invalid number of channels, Unsupported media : invalid sampling rate, Warning: make sure you have a good serial id – Ulead 1.0 User Manual
Page 193: Warning, media in dlt drive is write protected
SpruceUp User’s Guide
14—15
Unsupported Media : Invalid Number of Channels
Fatal import error. Signifies a problem with the number of audio channels in the stream.
Indicates the file cannot be imported, and must be re-created compliant with the DVD
specification.
Unsupported Media : Invalid Quantization (bits per sample)
Fatal import error. Signifies a problem with the number of bits in the audio. SpruceUp
supports 16-bits only. Indicates the file cannot be imported, and must be re-created.
Unsupported Media : Invalid Sampling Rate
Fatal import error. Signifies a problem with the audio sampling rate. Indicates the file
cannot be imported, and must be re-created compliant with the DVD specification. See the
MPEG Settings Summary topic for details.
Unsupported Media : Invalid Wave Format (only WAVE_FORMAT_PCM
format is supported)
Fatal import error. Signifies the .wav audio file uses raw PCM, which is not supported.
Indicates the file cannot be imported, and must be re-created compliant with the DVD
specification.
W
WARNING: Make sure you have a good Serial ID!
Indicates the serial number you just entered does not match the one previously entered.
Ensure you typed it in correctly.
WARNING: Manually changing your serial number may invalidate your
right to use this product.
Reminder to make sure you enter your correct serial number.
Warning, media in DLT drive is write protected!
Verify the tapes write protect setting.
Y
You must load the ASPI Manager software on your computer to access a
SCSI drive!
SCSI drives require a WinASPI driver to be supported by SpruceUp. This is typically installed
with SpruceUp.
You must upgrade your DVD-R S101 drive firmware to version 1.07 or
higher in order for this device to work properly!
See Pioneer's web site for information on upgrading your drive to a compatible version.
You must upgrade your DVD-R S201 drive firmware to version 1.00 or
higher in order for this device to work properly!
See Pioneer's web site for information on upgrading your drive to a compatible version.