Immediate homing, Absolute homing, Immediate homing absolute homing – Rockwell Automation 2097-Vxxx Kinetix 300 EtherNet/IP Indexing Servo Drive User Manual User Manual

Page 115

Advertising
background image

Rockwell Automation Publication 2097-UM001D-EN-P - November 2012

115

MotionView Software Configuration

Chapter 5

Table 59 - Homing Methods Summary

Immediate Homing

The immediate home operation on the drive defines the current position of the
motor to be the home and the position set to the [HomeOffset] parameter. The
drive must be in Indexing mode or EtherNet/IP Positioning mode and the drive
must be enabled.

Absolute Homing

The absolute homing on the drive behaves similarly to the Immediate Homing
operation. The homing does not induce shaft motion on the motor. The current
position of the motor is the home position and the position is set to the
[HomeOffset] parameter.

The difference between the absolute position in the encoder and the
[HomeOffset] parameter is stored in nonvolatile memory so that all absolute
motion is relative to the current position. After a power cycle the drive continues
to operate as though it was homed.

For absolute homing on motors with absolute encoders, execute an Immediate
Home.

Home Method

(1)

(2)

(1) All other values of [HomeMethod] are not used for the Kinetix 300 drive and attempts to use those values will result in a drive fault.
(2) Home-to-torque is not available.

Direction

Homing Type

Home Sensor Polarity

7

Switch-Marker

Forward

Bi-directional

Active/Rising

8

Switch-Marker

Forward

Uni-directional

Active/Rising

9

Switch-Marker

Forward

Bi-directional

Active/Falling

10

Switch-Marker

Forward

Uni-directional

Active/Falling

11

Switch-Marker

Reverse

Bi-directional

Active/Rising

12

Switch-Marker

Reverse

Uni-directional

Active/Rising

13

Switch-Marker

Reverse

Bi-directional

Active/Falling

14

Switch-Marker

Reverse

Uni-directional

Active/Falling

23

Switch-Fast

Forward

Home to sensor

Active/Rising

25

Switch-Slow

Forward

Home to sensor

Active/Falling

27

Switch-Slow

Reverse

Home to sensor

Active/Falling

29

Switch-Fast

Reverse

Home to sensor

Active/Rising

33

Marker

Reverse

Home to marker

N/A

34

Marker

Forward

Home to marker

N/A

35

Immediate

N/A

N/A

N/A

Advertising