Rockwell Automation 2097-Vxxx Kinetix 300 EtherNet/IP Indexing Servo Drive User Manual - Manual (Page 145)

Rockwell Automation Publication 2097-UM001D-EN-P - November 2012 145
Configure and Start Up the Kinetix 300 Drive Chapter 6
Configure the Drive
Parameters and System
Variables This section provides information for accessing and changing parameters
not accessible through RSLogix 5000 software.
Tools for Viewing Parameters
Follow these steps to view parameters.
1. From MotionView software, click Tools.
2. Click Parameter>IO View.