Rockwell Automation 2097-Vxxx Kinetix 300 EtherNet/IP Indexing Servo Drive User Manual - Manual (Page 73)

Rockwell Automation Publication 2097-UM001D-EN-P - November 2012 73
Connecting the Kinetix 300 Drive System Chapter 4
This diagram shows an example of three-phase power wires for motors/actuators
that have no brakes. Thermal switch wires are included in the feedback cable.
See Kinetix 300 Drive/Rotary Motor Wiring Examples beginning on page 176
for interconnect diagrams.
Figure 42 - Motor Power Terminations (three-phase wires only)
The cable shield clamp shown above is mounted to the subpanel. Ground and
secure the motor power cable in your system following instructions on
page 76 .
Motor Cable
Shield Clamp
Motor Power (MP) Connector Plug
Kinetix 300 Drive