Rockwell Automation 2097-Vxxx Kinetix 300 EtherNet/IP Indexing Servo Drive User Manual - Manual (Page 124)

124 Rockwell Automation Publication 2097-UM001D-EN-P - November 2012
Chapter 5 MotionView Software Configuration
Upgrade Firmware Follow these steps to upgrade the firmware in your Kinetix 300 drive.
1. Obtain the latest firmware from
http://www.rockwellautomation.com/
compatibility/ .
2. Run the MotionView software.
3. Click Upgrade.
This dialog box appears.
4. Comply with dialog box requests and click yes.
This dialog box appears.
5. Enter the IP address of the Kinetix 300 drive you intend to upgrade.
6. Navigate to the .lar file that you downloaded in step 1.
7. Click Upgrade Firmware.
Do not turn off power to the computer or the drive.
8. When the upgrade is finished, restart the drive.
Access the upgraded MotionView software by entering the drives IP address in a
web browser.