Bio-Rad iQ™5 Optical System Software, Version 2.1 - Manual (Page 140)

Section 8 User Profiles
- 131 -
3. Click OK and enter the correct information. If you have forgotten your password, it may
be reset by the iQ5 Administrator.
4. The current user can be determined by looking at title bar (in the top-right corner) of the
software. The current user name will be displayed in parentheses next to the Bio-Rad iQ5
header (Figure 8.13).
Fig. 8.13. User Name Displayed in the iQ5 Software Title Bar.
8.3.1 Switching Users
To switch a user:
1. Click on the Workshop module icon, then select Switch User from the Tools menu.
2. The Login dialog box will appear.
3. Select the desired user from the User pull-down list. Enter the password (if any) in the
Password text box and click OK.
4. If the user name you want is not available, you will need to add it in the User Profile
module in the Administration tab.
8.3.2 Changing Password
To change the password of the current:
1. Click on the Tools menu and select Change Password. The Change Password window
opens (Figure 8.14).
2. Enter the old password in the top text box. Enter the new password in the New Password
and Confirm New Password text boxes.
3. Click OK.
Fig. 8.14. The Change Password Dialog Box.