Bio-Rad iQ™5 Optical System Software, Version 2.1 - Manual (Page 72)

Section 6 Data Analysis Module
- 63 -
Fig. 6.20. The Define Trace Style Window.
To modify a trace style:
1. Select the Sample Types Group to be modified (for example, Standards). (Note that
green is the default color that is automatically assigned to the Standards group when this
button is active.)
2. To specify a different color for a given sample type group on the plate, click on the
colored button in the Select Color column.
3. Select the symbol type (the default style is “None”).
4. Click Preview to see your changes, and if those changes are satisfactory, click OK.
To choose on a well–by-well basis, click the Selected Well(s) button, select a color and symbol
type, and then select the desired wells in the plate grid at the bottom of the Define Trace Style
dialog box. Click a column or row header to change an entire row or column. The dialog box
outlines the edge of each well in the grid in the selected trace color.
Select All Replicates to apply the selected color to all selected replicates of the wells.
To reset original trace style settings, click Random Colors and Remove Symbols, then click OK.
Display Data Option
Click Display Data to change the view of the results spreadsheet as follows:
•
When Display Data is unselected, the results spreadsheet displays the plate spreadsheet
view
•
When Display Data is selected, the results spreadsheet displays two tabs: the
Amplification Data (RFU) tab and Standard Curve/C
T
Results tab. You can perform the
same function by clicking Results