Bio-Rad iQ™5 Optical System Software, Version 2.1 - Manual (Page 28)

Section 4 Workshop Module
- 19 -
Section 4. Workshop Module
This section contains information on the following topics:
o
Setup Tab (page 19)
o
Plate Setup (page 21)
o
Protocol (page 31)
o
Run Set (pg 37)
o
Opening a Data File (page 39)
o
Applying Alternate Calibration Files (page 39)
The Workshop module consists of the Setup and Plate Summary tabs. For detailed information
on the information contained in the Plate Summary tab, refer to section 4.2.10
4.1 Setup Tab
The Setup tab window (Figure 4.1) consists of four sections.
Fig. 4.1. The Setup tab.