PRG V676 User Manual 3.5 User Manual
Page 118
100
V676
®
/ V476
®
CONTROL CONSOLE USER MANUAL
Display Settings
Use the following buttons to display different types of data:
+
Value (V) - displays the numeric value currently being received by the luminaire for each parameter.
+
Parameter (P) - displays the Preset, Color or Beam which the parameter is currently referencing (default setting).
+
Shifted Parameter (S) - displays any shifted parameters which have been set at encoders.
+
Timing (T) - displays any associated timing information.
+
Dynamic (D) - displays any associated dynamic state information and continuous action such as wheel spins.
+
Cue Source (C) - displays the source cue for each parameter.
+
Execution Time (X) - displays remaining execution and delay times.
+
Column Window (Columns...) - opens parameter column window that determines which parameters are
displayed.
+
Set Channels (Chan) - sets channels from the current channel selection, as limited by the display filter (toggle
action). (Refer to
+
Freeze Channels (F) - channels are set to the currently visible channels, and are not affected by subsequent
changes to the global display filter (toggle action).
Keyboard Shortcuts and Tips
+
WIN
+
R
= Reset Order
+
WIN
+
SHIFT
+
R
= Size To Fit
+
Holding down
ALT
on the Mac keyboard or [Option] on the front panel and clicking a column will lock the column
in place. (Note that locked columns will be moved to the left of the unlocked columns.)
+
Click on a column’s header and drag to reposition the column.
+
Hold the cursor over the toolbar icons to view "What’s This?" text.
Color Coding
The Luminaire Status values are color coded in order to provide useful information regarding how the values are
changing from cue to cue, and if a value comes from manual control or an effect. Color indications are as follows:
Changing Data Values
Data values can be increased or decreased for the selected luminaires by clicking on a column header and then
holding down the
CTRL
button on the Mac keyboard while pressing the keyboard’s up/down arrows.
When working with either the Pan or Tilt columns, pressing
CTRL
+
SHIFT
+
UP
or
DOWN
arrow will increment or
decrement the alternate parameter (Tilt when Pan is selected and vice versa).
Magenta
= unchanged values.
Orange
= values changed by manual control.
Blue
= increasing intensity values.
Gray
= values changed by an effect.
Green
= decreasing intensity values.
Brown
= values changed by another console.