PRG V676 User Manual 3.5 - Manual (Page 348)

330 V676 ® / V476 ® CONTROL CONSOLE USER MANUAL
MIDI Tab
MIDI options can be set at the MIDI tab.
MIDI Show Control Message Format
When a Cue Number is sent as data, additional informational fields may or may not be included as part of the
complete "Cue Number" description. The option selected in the "Options" area of the MIDI window will determine
how much data will be sent with the Show Control "Go" command.
The MIDI show control fields are used as follows:
The stack and cue number (<Q number> field) is sent in "n.n.n" format. For example, cue 2-1.5 would be sent as
2.1.5.
When using MIDI Notes
feature, these buttons
select which MIDI channel
it will "listen" to (1-16).
Show Control Settings
Select MIDI Input Device/Port
The console will accept a value
of either 1 or 127 for input
Go Command Output Options -
see "Message Format" below
Select MIDI Output Device/Port
MIDI Show Control
Output Settings
<Q number> 00 <Q list> 00 <Q path> F7
Stack & Cue #
Submaster #
not used on output