PRG V676 User Manual 3.5 - Manual (Page 94)

76 V676 ® / V476 ® CONTROL CONSOLE USER MANUAL
Six buttons are available for simplifying channel selection:
+ [Clr] - clears all channel selections.
+ [All] - selects all patched channels.
+ [Inv] - (Invert) deselects currently selected channels and selects all other patched channels.
+ [Act] - selects all channels with active * luminaires.
+ [Mar] - selects all marked * channels.
+ [Z] - selects all channels in a zero * state.
Four status mimic buttons are available. These buttons highlight in purple as an indicator rather than as a selection
tool:
+ [Online Status] - indicates all online luminaires.
+ [Active Status] - indicates all luminaires that are active *.
+ [Marked Status] - indicates all luminaires that are marked *.
+ [Z Status] - indicates all luminaires that are in a zero * state.
Four luminaire utility buttons are also available:
+ [Arm] - must pressed first (it will latch on) before pressing [Douse] or [Home/Reset] to complete those commands.
(This prevents accidental dousing or reset actions.)
+ [Start] - starts lamp for all selected arc luminaires with remote start capability.
+ [Douse] - douses lamp for all selected arc luminaires with remote start capability. Press [Arm] then press [Douse]
to send the douse command.
+ [Home/Reset] - dual action button.
[Home] sets parameters to defaults. Press [Arm] then press [Home/Reset] once to send the home command.
[Reset] recalibrates luminaires. Press a [Arm] then press [Home/Reset] twice to send the reset command.
Also refer to
"Home / Reset (Recalibration)" on page 81.
* Active - luminaires with intensity greater than zero (1-100%).
Marked - luminaires with an intensity state of "marked."
Zero - luminaires with an intensity state of zero ("hard zero", 0% level).
(For a more in-depth explanation, refer to
"Intensity States" on page 162).