PRG V676 User Manual 3.5 - Manual (Page 386)

368 V676 ® / V476 ® CONTROL CONSOLE USER MANUAL
Updating Profiles
In order to protect existing show files, the console does not automatically update them with any newly imported
profiles when using the Import Profiles feature (see previous page). If you desire to update an existing show file with a
new profile(s), this can be done using the Update Profiles function.
To update profiles:
Step 1. At File menu, select Update Profiles.
Step 2. Update Profiles window will open and all profiles in the open show file will be compared to the latest profiles
in the console’s Profiles folder. If newer profile versions exist, these will be noted in the window.
Step 3. Check boxes of any fixtures requiring an update and click Update.
Step 4. A confirmation dialog will appear. Click Update to continue.
Note: To ensure that new profiles are properly installed, reset Nodes after profiles are updated.
Update Button
Check box to select for update