PRG V676 User Manual 3.5 - Manual (Page 328)

310 V676 ® / V476 ® CONTROL CONSOLE USER MANUAL
Timing Disable
The Timing Disable feature causes timing data to be ignored for any cues that are activated on that submaster while it
is in timing disable mode.
To set Timing Disable mode using submaster touchscreen:
Step 1. Choose a submaster to bring up its Setup options. ("Choose" is activated by touching the specific
submaster on the touchscreen.)
Step 2. Select

Timing Disable

checkbox.
Step 3. Press

Close

to close Setup screen.
To release a submaster from Timing Disable mode using submaster touchscreen:
Step 1. Choose a submaster to bring up its Setup options. ("Choose" is activated by touching the specific
submaster on the touchscreen.)
Step 2. Deselect

Timing Disable

checkbox or press

Clear

to clear all submaster settings.
Step 3. Press

Close

to close Setup screen.
To select Timing Disable mode for a submaster using "choose" method:
+ Press and hold

Timing Disable

while choosing a submaster. ("Choose" is activated by touching the specific
submaster on the touchscreen.)
Modes
Press the area
below a
submaster’s
number to
"choose" the
submaster