PRG V676 User Manual 3.5 - Manual (Page 133)

V676 ® / V476 ® CONTROL CONSOLE USER MANUAL 115
FUNCTION FILTER
Overview
The Function Filter is used to withhold (or mask) certain parameters or parameter attributes from a preset or a cue,
and to control what is recalled in a submaster.
Important! It is important to note the exact meaning of the term "filter" as it pertains to console operation. When a
parameter is
not filtered (i.e. selected/highlighted at the Function Filter screen), its data would be transferred during
any subsequent store or recall operations. When a parameter is filtered (i.e. not selected/highlighted), its data would
be withheld from a data transfer. This is represented graphically in the following illustration:
Filtered (Not Highlighted)
Parameter 1
Parameter 2
Function Filter
Not Filtered (Highlighted)
Fixture
(console)
20 Filter Templates
Filter Grid
Toggles between
Page 1 and Page 2
Selects All on page
Clears Selections on page
Close Screen Button
Sends Filters to Cues
Selects All Filters (pages 1 &2)
Clears All Filters (pages 1 &2)