PRG V676 User Manual 3.5 - Manual (Page 351)

V676 ® / V476 ® CONTROL CONSOLE USER MANUAL 333
DISPLAY FILTERS
Loading Filters
Console status windows can be configured to include data from specified channels only.
Once a display filter has been loaded, only data from the specified channels would be
shown in the status windows and only these luminaires would appear in the 3D Graphic
window.
Load a display filter:
Step 1. Select only channels you wish to be displayed in status or 3D Graphic windows.
Step 2. At front panel, press [Display Filter] toggle button (button will flash) or at Special
menu, select Load Display Filter.
Step 3. To load a new display filter, repeat steps 1 and 2 for different groups of channels.
Clear a filter:
Step 1. Clear all channel selections.
Step 2. At front panel, press [Display Filter] toggle button or at Special menu, select
Load Display Filter.
Display Filter
Toggle Button