PRG V676 User Manual 3.5 - Manual (Page 95)

V676 ® / V476 ® CONTROL CONSOLE USER MANUAL 77
Select a single channel (or multiple single channels):
Step 1. Select [1000] as required.
Step 2. Select [0] through [900] as required. Button will light.
Step 3. Select button of desired channel. Button will light.
Step 4. To select multiple single channels, continue selecting buttons of channels to add (selections "pile on").
Example : To select channel 521, ensure that [1000] button is not active, select the page [500] button and
then select [21] on the 100-button array.
Select a range of channels:
Step 1. Select [1000] as required.
Step 2. Select [0] through [900] as required. Button will light.
Step 3. Select button of first channel. Then, while holding mouse button down, drag across range of channels
(mouse) or drag finger across range of channels (touchscreen).
Select channels on multiple pages:
Step 1. Select [1000] as required.
Step 2. Select [0] through [900] as required. Button will light.
Step 3. Select required channels.
Step 4. Select next required page ([0] through [900]). First page button will be dimly highlighted to show that
channels are selected on that page.
Step 5. Select required channels on new page.
Step 6. Repeat Steps 4 and 5 as required.
Deselect channels:
+ Press any selected channel button(s) to deselect.
Note: The order of channel selection is retained when storing a Group. Refer to "Ordered Groups" on page 151.