PRG V676 User Manual 3.5 - Manual (Page 57)

V676 ® / V476 ® CONTROL CONSOLE USER MANUAL 39
SHOW FILES
About Show Files
All programming information for a production (i.e., a show) is stored in a show file . Show files are made up of
individual data files nested within a show file folder. When the Vx76 software application is launched, it will
automatically open the last show file used on the console, unless one is not available, in which case a new show file is
automatically opened.
Show files can be managed by one of two methods: 1) using the Utilities screen available in the console’s central
touchscreen, or 2) using the Show File Manager window available in the Mac menu bar. These controls allow show
files to be opened, duplicated, renamed, deleted, imported, and/or archived to an external storage device.
Note: This section provides an introductory overview of show files. For more in-depth instructions, refer to the "Show
File and Data Management" on page 354.
Utilities Screen
The central touchscreen Utilities screen is used for show file management. (The functions are the same as the Show
File Manager Mac window.)
+ Press the

Utilities

button on the touchscreen to open the show file controls.
Utilities
Button
List of show files in console’s Data Folder External Source Selection Pop-up
Launches selected show file Opens a new show file
File Options