PRG V676 User Manual 3.5 - Manual (Page 79)

V676 ® / V476 ® CONTROL CONSOLE USER MANUAL 61
To recenter selection box:
+ While in Zoom mode, tap in Plan View to recenter the selection box at any time.
To zoom to selected fixture:
+ While in Zoom mode, select a fixture icon then press the Zoom-To-Selection icon.
Pan
The view can be panned.
To pan the view:
+ Press and hold [Shift] while dragging finger in Plan View. The viewing angle will be panned as you drag.
Nudge and Align
When Patch Edit mode is enabled, several new action icons appear at the right of the Plan View.
To nudge a fixture(s):
Step 1. Enter Patch Edit mode by pressing Patch Editing button.
Step 2. Select fixture icon and use nudge arrows to move fixture. The arrows will be displayed at the bottom of the
layout when fixtures are selected. (Selected fixtures can be repeatedly nudged by holding down the nudge
arrows.)
To align fixtures:
When multiple fixture icons are selected, the Align icon will be displayed at the right of the Plan View.
Step 1. Enter Patch Edit mode by pressing Patch Editing button.
Step 2. Select multiple fixtures.
Step 3. Press Align icon to bring up alignment options.
Nudge Controls
Align Icon
Patch Editing Button