PRG V676 User Manual 3.5 - Manual (Page 346)

328 V676 ® / V476 ® CONTROL CONSOLE USER MANUAL
SETTINGS
Settings Window
The options available in the Settings window are advanced setups that are not required when first powering up and
patching your system. These can be changed at any time.
To change settings:
Step 1. At Setup menu, select Settings. Settings window will open.
Step 2. Click tabs to access different setting types.
General Tab
General console settings can be set at the General tab.
Actions Tab
The Action settings define what the console will do at start-up or in the event communication is lost.
Click to reverse keypad
Sets unit of measure for
3D location distances
Sets the internal
date/time stamp
Configures console for
Last-Takes-Precedence
operation for intensity.
(LTP mode is console-wide,
affecting all submasters)
Configures internal
clock to take over in
the event of a loss of
external when checked
arrow direction (reverse
when box is checked)
Allows channel selection
in Status windows
Selects only channels that
reference the recalled preset in a
cue when using Quick Focus mode Specifies whether the palette
number is included in its label
Sets the universal console
Parameter display to Value
or Percent
Sets the universal console Palette
Cue Recall to Value or Reference
Tells the luminaires what to do in the event
communication is lost between the console
and luminaire/interface devices for more than
15 seconds
Tells the console what
to do upon startup