PRG V676 User Manual 3.5 - Manual (Page 132)

114 V676 ® / V476 ® CONTROL CONSOLE USER MANUAL
Fanned Timing and Delays
Timing and delay attributes can be "fanned" into channel selections using the soft encoders or command-line keypad.
This function works in conjunction with the Function Filter. The parameter you are working with
must be selected in
the Function Filter.
Note: Also refer to "Fan" on page 92.
From Encoder
Step 1. Using Function Filter, set parameter filters.
Step 2. At soft encoder window, turn Fan on by holding down [Fan] button or double-clicking [Fan] button.
Step 3. Select required channels.
Step 4. Rotate encoder to set value.
From Keypad
Step 1. Using Function Filter, set parameter filters.
Step 2. Select required channels.
Step 3. Press [Time]* [m] [Thru] [n] [Enter] - evenly distributes the time setting across the channel selection m
through n .
* [Delay] can be used instead of [Time]
Example :
[Time] [1] [Thru] [6] [Enter] - fans time across current channel selection, following fan type, with the first channel
starting at 1 second and the last channel starting at 6 seconds.
1 2 4 3 5 8 6 7 9 10
11 12 14 13 15 18 16 17 19 20
Fan Effect Frame Image
Slow 3D Beam
Shift Grid Dynam Color
Fan Button