PRG V676 User Manual 3.5 - Manual (Page 91)

V676 ® / V476 ® CONTROL CONSOLE USER MANUAL 73
Eight select buttons are available for simplifying channel selection:
+ [Slice] - for future use.
+ [Zero] - selects all channels in a zero * state.
+ [Mark] - selects all marked * channels.
+ [All] - selects all patched channels.
+ [Dynam] - for future use.
+ [Active] - selects all channels with active * luminaires.
+ [Invert] - deselects currently selected channels and selects all other patched channels.
+ [Clear] - clears all channel selections.
Four status mimic buttons are available. These buttons highlight as indicators rather than as a selection tool:
+ [Online] - indicates all online luminaires.
+ [Active] - indicates all luminaires that are active *.
+ [Mark] - indicates all luminaires that are marked *.
+ [Zero] - indicates all luminaires that are in a zero * state.
Four luminaire utility buttons are also available. These apply only to selected luminaires:
+ [Start] - starts lamp for all selected arc luminaires with remote start capability.
+ [Douse] - douses lamp for all selected arc luminaires with remote start capability. Press and hold [Arm] while
pressing [Douse] to send the douse command.
+ [Arm] - must be held along with [Douse] or [Home/Reset] to complete the command.
+ [Home/Reset] - dual action button.
[Home] sets all parameter timing to zero and clears any intensity Mark or Zero states. Press and hold [Arm] while
pressing [Home/Reset] once.
[Reset] recalibrates luminaires. Press and hold [Arm] while pressing [Home/Reset] twice.
Also refer to
"Home / Reset (Recalibration)" on page 81.
* Active - luminaires with intensity greater than zero (1-100%).
Marked - luminaires with an intensity state of "marked."
Zero - luminaires with an intensity state of zero ("hard zero", 0% level).
(For a more in-depth explanation, refer to
"Intensity States" on page 162).
Invert
Mark Slice Zero
Clear
All
Online Active Mark Zero
Start Arm Douse
Home
Reset