PRG V676 User Manual 3.5 - Manual (Page 232)

214 V676 ® / V476 ® CONTROL CONSOLE USER MANUAL
ADVANCED OPERATIONS
Using the Set Edit Screen
The Set Edit screen can also be used to create and edit set parts. This screen displays up to 50 parts at a time, and
will be necessary to use when any Set requires more than seven parts (since the Effect Edit screen will display a
maximum of seven parts).
To open:
+ At Effect Edit screen, press [Edit Set] button.
An Effect Set palette is provided at the bottom of the screen, which provides access to all stored sets. When a set is
selected in the palette, its parts will be displayed at the top of the screen. Sets can be created and edited here using
the same operations as on the Effect Edit screen. Refer to
"Creating a Basic Effect" on page 196 and "Editing Effects"
on page 200 for instructions.
By using the Set Edit screen, it is possible to create sets before they are actually stored into an effect. This can be
useful if pre-programming is required.
Edit Set
Button