PRG V676 User Manual 3.5 - Manual (Page 220)

202 V676 ® / V476 ® CONTROL CONSOLE USER MANUAL
Mode
Mode determines how the sequence steps will run in relationship to each other.
+ Break - Each part makes one pass through each step on any individual cycle and then goes to its background
state when not in a step.
Breaking/Cascade Effect:
* For example purposes, actions are not necessarily complete sequences. An action merely represents what happens at
each stage of the effect whether it is a complete sequence or a portion of a sequence.
+ Continuous - Once started, all parts are in some step at all times during the effect. Once a part reaches the last
step, it automatically goes back to the first step and repeats sequence. (Refer to the example diagram on next
page.)
+ Cycle - The effect runs all set parts through the first sequence step, then each set part through the second
sequence step, etc.
Step 3 Step 2 Step 1
none Part 1 Part 2
Step 3 Step 2 Step 1
Part 1 Part 2 Part 3
Step 3 Step 2 Step 1
Part 2 Part 3 Part 4
Step 3 Step 2 Step 1
none none Part 1
Etc.
B State
none
B State
none
B State
none
B State
Part 1
Action 1
Action 2
Action 3
Action 4
Action 5
*