Update – PRG V676 User Manual 3.5 User Manual
Page 298
280
V676
®
/ V476
®
CONTROL CONSOLE USER MANUAL
Update
The Update feature is used to store modified channels back into their source cues. Any channels that have been
modified from a cue active in a submaster will update those changes into the cue when a general Update or Update
for that specific cue is commanded. In addition, new channels can be added into a cue with Update, if the Update
command is targeted to a specific cue and the channels have been made active and are not in other active cues.
Guidelines:
+
Any rate modifications will affect the stored time values accordingly.
+
Unexpected behavior can occur with updates involving intensity if the submaster and Grand Master faders are
not at full. Refer to
"Store, Update, and Selective Store with Submasters"
+
Update is intended for active cues only. To add sections of the live stage output to inactive cues, use the Selective
Store command (refer to
+
Any channel transferred to an independent submaster or parked in patch will not be updated. All other cue data
remains as originally set.
Note: Unlike Selective Store, Update commands are not routed through the Channel Select panel and the filter
settings.
Update a cue:
+
[Update] <Cue> [n] [Enter] - updates Cue n with only those channels that were receiving their instructions from
that cue.
Update multiple cues:
+
[Update] [Enter] - updates all modified channels in their source cues. Any channels that had no source cue would
not be stored.
Update a preset:
+
[Update] [Preset] [Enter] - updates all modified channels in their source cues and preset(s). Any channels that had
no source cue would not be stored.
Update a preset in a specific cue:
+
[Update] [Cue] [n] [Preset] [Enter] - updates Cue n and its preset(s) with only those channels that were receiving
their instructions from that cue.
Undo (reverse) an Update command:
+
[Undo] [Enter] - reverses the store portion of the most recent undo (any new channels that were stored into the
cue will be removed from the cue). The source cue updates that were performed will
not
be undone.