PRG V676 User Manual 3.5 - Manual (Page 84)

66 V676 ® / V476 ® CONTROL CONSOLE USER MANUAL
Plan View Actions (Show/Hide)
Various Plan View options are available from the Actions menu. These options can be used to apply channel selection
and show/hide fixtures in layouts.
+ Apply Channel Selection - takes current channel selection and makes it the patch selection. This only works
when the Plan View is in Patch Edit mode.
+ Select All/Visible/Hidden - these options select either all, the visible, or the hidden channels in the current layout.
+ Hide Channels - hides the currently selected channels in the layout. This action only works with custom layouts
and will be grayed out when the standard 2D or 3D layouts are active.
+ Show Channels - shows (unhides) the currently selected channels in the layout. This action only works with
custom layouts and will be grayed out when the standard 2D or 3D layouts are active.
Note: Hidden fixtures only show up in Patch Edit mode. They are displayed in a lighter outline to indicate that they are
currently in the hidden state.
To apply channel selection:
Step 1. Select one or more channels on the console.
Step 2. Press

Actions

and choose "Apply Channel Selection."
To select channels in Plan View:
Step 1. Press

Actions

Step 2. Choose "Select All," "Select Visible," or "Select Hidden" as required. The corresponding channels will be
selected in the Plan View.
To hide channels:
Step 1. Press

Layout

and choose a custom layout.
Step 2. Select one or more channels in the layout to hide.
Step 3. Press

Actions

and choose "Hide Channels."
To show (unhide) channels:
Step 1. Press

Layout

and choose a custom layout.
Step 2. Select one or more hidden channels in the layout.
Step 3. Press

Actions

and choose "Show Channels."
Actions Menu