PRG V676 User Manual 3.5 - Manual (Page 335)

V676 ® / V476 ® CONTROL CONSOLE USER MANUAL 317
Release a submaster from Manual Assign mode using submaster touchscreen:
When releasing a submaster from a manual assignment, no parameter data will be changed; the channel is just no
longer associated with that submaster.
Step 1. Choose a submaster to bring up its Setup options. ("Choose" is activated by touching the specific
submaster on the touchscreen.)
Step 2. Press

Manual Assign

or press

Clear

to clear all submaster settings.
Step 3. Press

Close

to close Setup screen.
Intensity Level with Manual Assign
When channels are assigned to a submaster using the Manual Assign function, the current intensity value for the
selected channels at the time of being assigned becomes the full intensity range which can be adjusted by the
submaster fader.
Example 1:
If a channel is assigned while its intensity value is at 100%, the submaster fader will have control of all 100%
of the luminaire’s potential intensity output. Subsequently reducing the submaster fader from 100% to 50%
would result in a luminaire intensity value of 50%.
Example 2:
If a channel is assigned while its intensity value is at 50%, the submaster fader will have control of only half
of the luminaire’s potential intensity output (scaled appropriately to the fader’s full range). Subsequently
reducing the submaster fader from 100% to 50% would result in a luminaire intensity value of 25%.