PRG V676 User Manual 3.5 - Manual (Page 327)

V676 ® / V476 ® CONTROL CONSOLE USER MANUAL 309
To clear rate mode using submaster touchscreen:
Step 1. Choose a submaster to bring up its Setup options. ("Choose" is activated by touching the specific
submaster on the touchscreen.)
Step 2. Deselect

Rate

checkbox or press

Clear

to clear all submaster settings.
Step 3. Press

Close

to close Setup screen.
To select rate control for a submaster using "choose" method:
Step 1. Press and hold

Rate

while choosing a submaster. ("Choose" is activated by touching the specific
submaster on the touchscreen.)
Step 2. Use Rate encoder to control rate.
Press the area
below a
submaster’s
number to
"choose" the
submaster