PRG V676 User Manual 3.5 - Manual (Page 361)

V676 ® / V476 ® CONTROL CONSOLE USER MANUAL 343
Importing a Venue
A graphic representation of your venue or stage production can be imported for use in the 3D Graphic window. This
file, referred to as a "venue", is stored with the show file. If a new venue is imported, it will overwrite the previous
venue in the show file.
The venue can be created using most common 3D modeling software packages, then saved in one of the following
formats for import:
Note: This version of console software does not support files in AutoCAD 2000 format or files which contain "3D
solids" information. Drawings created in AutoCAD 2000 should be saved as an AutoCAD R14 drawing.
Note: When importing, it is helpful to know the point of origin on which the venue graphic is based, although it can be
determined in the event this information is unavailable.
Import a venue:
Step 1. Connect external drive (containing your venue file) to console.
Step 2. At File menu, select Import Venue.
Step 3. At Open window, select your 3D model file and click Choose.
+ *.3dmf + *.3df
+ *.dxf + *.dwg
Select 3D model file
Click to import file into console’s 3D Graphic window