PRG V676 User Manual 3.5 - Manual (Page 389)

V676 ® / V476 ® CONTROL CONSOLE USER MANUAL 371
Dimmer Check Commands
Dimmer Check commands are available on the command-line.
The command syntax is:
+ [Dimmer] universe/channel [At] value [Enter] - Set dimmer at universe/channel to value
+ [Dimmer] [+] - advance to next dimmer
+ [Dimmer ] [-] - return to previous dimmer
+ [Dimmer] [Dimmer] - exit dimmer check
When dimmer check is active, the [Dimmer] key on the keypad will blink.
Clear Status Errors
All error messages can be cleared using the Clear Status Errors command.
To clear all error messages:
+ At Special menu, select Clear Status Errors.