PRG V676 User Manual 3.5 - Manual (Page 37)

V676 ® / V476 ® CONTROL CONSOLE USER MANUAL 19
V476 Desk Layout
The following illustration shows the major control areas of the V476 front panel.
Figure 1-13: V476 Front Panel Layout
Command Keypad -
Used to input various
command-line actions.
Central Touchscreen -
Displays command-line entries and
active cue numbers. Also used to
configure Timing, Filter, Patch, and
other console operations.
Grandmaster Fader / Blackout Button -
Used to master overall intensity output.
Submasters/Utility Touchscreen -
Displays system configuration
information and submaster settings.
Encoders / Buttons -
Six knobs and associated buttons
which can be mapped for control of
various luminaire parameters.
Palette -
Used to store and recall
Preset, Color, Beam, Group,
Macro, Snapshot, Effect,
Dynamic and Stack settings.
Intensity Buttons -
Applies an intensity
state to selected
luminaire(s).
Intensity Encoder -
Adjusts intensity level for
selected luminaire(s).
Board Control Buttons - Provides
a method to record events on the
console and play them back on
command.
Pan/Tilt Encoders -
Used to manually
control pan and tilt
functions of selected
luminaire(s).
Soft Function Buttons -
Used with the touchscreen
displays. Function will depend
on the current controls being
shown in the touchscreen.
Rate Encoder -
Used to speed up or slow down the
playback of events (cues or effects).
Submaster Faders -
Used for playback control.
Panel Page Buttons -
Select between three external display
workspaces and three palette workspaces.