PRG V676 User Manual 3.5 - Manual (Page 321)

V676 ® / V476 ® CONTROL CONSOLE USER MANUAL 303
Clear
The Submaster Setup screen provides options for clearing all modes and for returning to default settings. (Refer to the
Mode Control buttons in the screen capture below.)
+ Press

Default

to return to the default settings for the selected submaster.
+ Press

Clear

to clear all mode settings for the selected submaster.
+ Press

Close

to hide the submaster Setup options.
The Master Clear button releases a submaster from any applied modes and clears any active or pending cues
(returning the submaster to its default state). This clear feature is a two-step process, so that mode setting and cue
information can be cleared separately. (Refer to Master Clear button in the screen capture above.)
Clear modes, filter, and rate settings from a submaster:
+ Press and hold master

Clear

while choosing a submaster. ("Choose" is activated by touching the specific
submaster on the touchscreen.)
Clear active and pending cues from a submaster:
+ Press and hold master

Clear

while double-clicking on a submaster.
Press the area
below a
submaster’s
number to
"choose" the
submaster
Mode Control
Master Clear
Setup Options