PRG V676 User Manual 3.5 - Manual (Page 92)

74 V676 ® / V476 ® CONTROL CONSOLE USER MANUAL
Select a single channel (or multiple single channels):
Step 1. At Century Buttons, press [0] through [1900] as required. Button will light.
Step 2. At 100-Button Array, press button of channel number to be selected, [1] through [100]. Button will light.
Step 3. To select multiple single channels, continue selecting channels (channel selections "pile on").
Example :
To select channel 521, press the page [500] button and then press [21] on the 100-button array.
Select a range of channels:
Step 1. At Century Buttons, press [0] through [1900] as required. Button will light.
Step 2. At 100-Button Array, press button of first channel number to be selected. Then, while holding down first
button, press button of last number in range. First and last buttons will light, as will all those in-between.
Select channels on multiple pages:
Step 1. At Century Buttons, press [0] through [1900] as required. Button will light.
Step 2. At 100-Button Array, press button of first channel number to be selected. Then, while holding down first
button, press button of last number in range. First and last buttons will light, as will all those in-between.
Step 3. Press next required page ([0] through [1900]). First page number button will flash to show that channels are
selected on that page.
Step 4. Press buttons for channels to be selected.
Step 5. Repeat Steps 3 through 5 as required.
Deselect a single channel (or multiple single channels):
+ Press any selected channel button(s) to deselect.
Deselect a range of channels:
+ Press button of first selected channel button to be deselected. Then, while holding down first button, press button
of last number in range. The range will be deselected.
To select a single channel and deselect all others, double-click on any channel button.
Note: The order of channel selection is retained when storing a Group. Refer to "Ordered Groups" on page 151.
Tip