From keypad, Ordered groups, Ordered – PRG V676 User Manual 3.5 User Manual

Page 169: Groups

Advertising
background image

V676

®

/ V476

®

CONTROL CONSOLE USER MANUAL

151

Recall two or more groups:

Step

1. Access required Bank and Page of first group.

Step

2. Press required

Group Palette Button

.

Step

3. Access required Bank and Page of second group.

Step

4. Press required

Group Palette Button

of second group. Hold down [Page Button] to pile-on selections.

Step

5. Repeat Steps 3 and 4 as required.

Modify a group:

Modifications to existing groups can be done in the same manner as storing the original group as given above.

From Keypad

Store a Group:

Step

1. Select channels to be stored in group (refer to

"Selecting Channels"

on page 72).

Step

2. Press [Store] [Group] [n] [Enter].

Modify a Group:

Modifications to existing Groups can be done in the same manner as storing the original Group given above.

Recall a Group:

The following are samples of possible command-line entries to recall a group.

+

[Group] [n] [Enter] - selects all channels in Group n.

+

[Group] [n] [+] [m] [Enter] - selects all channels in Group n plus Channel m.

+

[Group] [n] [+] [Group] [m] [Enter] - selects all channels in Group n and Group m.

Ordered Groups

Channel selection

order

is retained when storing a Group. When recalling a Group, the following will apply:

+

Next/Last and Fan will follow original selection order.

+

[Store] [Set] [n] [Enter] - stores a group into an Effects Set. The selection order will become the Parts (of the Set).

+

[Group] [Set] [n] [Enter] - selects all channels in an Effects Set. The Parts of the set become the order. This can
then be stored as an Ordered Group.

Example

:

If channels 1, 3, 5, 2, 4, and 6 are selected in this order and then stored as an Ordered Group, this same order will be
recalled when pressing the [Next] or [Last] buttons.

To clear the order from a Group, press the [Invert] button twice. (It will return to numeric channel order 1, 2, 3, 4, 5, and
so on.)

Note: The sequential ordering of channels in the group can be changed using the Arrangement tab available on the
Group super palette. Refer to

"Arrangement Tab"

on page 155.

Advertising
This manual is related to the following products: